Product Overview
Main features
- SoC: NXP i.MX6 based Solo to Quad Core SOM Cortex A9
- Memory: Up to 2GB
- Storage: 8GB eMMC
- Temperature: Commercial (0C to 70C)
- OS: Linux
Specifications
| HummingBoard Base | HummingBoard Pro | |
| SOM Model | NXP i.MX6 based Solo to Dual Core SOM | NXP i.MX6 based Solo to Quad Core SOM |
| Memory & Storage | Up to 2GB DDR3* | Up to 2GB DDR3* |
| uSD | uSD, mSATA** | |
| Connectivity | 1xRJ-45*** | 1xRJ-45*** |
| 2xHost USB 2.0 | 2xHost USB 2.0 | |
| 2xHeader USB 2.0 | ||
| Mini-PCIe- half size | ||
| Media | HDMI-Out | HDMI-Out |
| SPDIF | LVDS | |
| MIPI- CSI-2 Camera | SPDIF | |
| Analog Audio | ||
| MIPI- CSI-2 Camera | ||
| I/O | Reset Button | Reset Button |
| 26 pins GPIO Header | 26 pins GPIO Header | |
| RTC | ||
| IR | ||
| OS Support | Linux | Linux |
| Dimensions | 85mmx56mm | 85mmx56mm |
| Power | 5V, uUSB | 5V, uUSB |
| Environment | No enclosure | No enclosure |
(*) RAM type and speed dependent on SOM
(**) Supported with SOM i.MX6 Dual and above
(***) 1000 Mbps link is limited to 470Mbps actual bandwidth due to internal chip buses
What’s in the box?
- HummingBoard Base/Pro (Models vary depending on the order)
- 5V micro USB Power adapter EU/US version (Optional)
- 16GB Micro SD card (Optional)
- Heatsink
Cable setup and prerequisites
Here is what you will need to power up the board:
- Linux or Windows PC
- HummingBoard Base/Pro with SOM
- 5V mirco USB power adapter
- USB to UART cable
- IP router or IP switch
HW interfaces
Please see below the features overview of the connector side of the HummingBoard Pro.
Print side connector overview of the HummingBoard Pro
Below are the features overview of the connector side of the HummingBoard Base.
Print side connector overview of the HummingBoard Base.
Software Install
List of supported OS
Bootable images can be found here.
Please see our software page for more detailed information and overview.
How-to flash OS
Please see how to flash the OS.
Linux terminal
How to connect serial connection on the HummingBoard Base/Pro, please see here.
Using HummingBoard Base/Pro GPIOs.
Please see our guide how to get to Linux terminal via serial connection.
Documentation
HummingBoard Base/Pro Schematics Files
HummingBoard Base/Pro Mechanical Files
HummingBoard Base/Pro Other Files
Revision history
| SKU | Description | Date | Revision | Link |
|---|---|---|---|---|
| SRHBCPE000CV36 SRHBCBE000CV36 | Transition from revision 3.5 to 3.6 | June 13, 2017 | 3.6 | Download |