1. Home
  2. Hardware Articles
  3. HummingBoard CBi
  4. HummingBoard Edge/Gate Boot Jumpers
  1. Home
  2. Hardware Articles
  3. HummingBoard Gate/Edge
  4. HummingBoard Edge/Gate Boot Jumpers

HummingBoard Edge/Gate Boot Jumpers

 

Only available for HummingBoard Gate/Edge rev 1.3 and above!

On the HummingBoard Gate/Edge it is possible to boot from different media – without blowing the eFuses.

Jumpers need to be setup at J5005


To boot from:

  • eMMC 3 jumpers will be needed: (1+2),(3+4), (7+8)
  • MicroSD 2 jumpers will be needed: (3+4), (5+6)
  • M.2 SATA SSD: 1 jumper will be needed: (1+2)
  • USB OTG: No jumpers needed: ensure that no jumpers are connected
Updated on August 12, 2019

Was this article helpful?

Related Articles