1. Home
  2. Hardware Articles
  3. HummingBoard Gate/Edge
  4. mikroBUS- Incompatible ClickBoards
  1. Home
  2. Hardware Articles
  3. HummingBoard Pulse
  4. mikroBUS- Incompatible ClickBoards
  1. Home
  2. Hardware Articles
  3. ClearFog Base/Pro
  4. mikroBUS- Incompatible ClickBoards

mikroBUS- Incompatible ClickBoards

While the ClearFog does implement the mikroBUS standard, there are still ClickBoards that do not work on the ClearFog! Before buying, please make sure that each pin used by the board supports the required function.

Sample: OLED C Click This board requires the AN pin which is meant as an analog input on the ClearFog, to be used as a digital output for controlling the display controller. However the ClearFog does currently (revision 2.1) not expose any output functionality on this specific pin. Mikroelektronika staff will gladly answer any compatibility questions you might have. So feel free to contact them!

Sometimes there is an easy solution to still use the given clickboard. This is a solution for OLED C: The INT pin on the mikroBUS header is not used by clickboard, so one just needs to solder a little wire bridging INT with AN onto the clickboard. And make sure to adapt all code to the new pin!

Updated on December 5, 2018

Was this article helpful?

Related Articles

Please note - this website is no longer being updated, please visit our new developer center by clicking here